Jiqing Wang | Engineering | Research Excellence Award

Published on by Academic Awards

Dr. Jiqing Wang | Engineering | Research Excellence Award

Beihang University School of Electronic and Information Engineering | China

Dr. Jiqing Wang is an emerging researcher in electronic science and intelligent computing, specializing in high-efficiency deep neural network acceleration and hardware–software co-design. His work bridges algorithm optimization—including model quantization, separable and partial convolution, and multi-scale feature extraction—with RTL-level FPGA/SoC hardware implementations. He has contributed to peer-reviewed, Scopus-indexed research, notably on hardware-friendly joint denoising and demosaicing systems that reduce model complexity while enhancing image quality and computational efficiency. With 29 citations across 24 documents and an h-index of 4, his research demonstrates growing impact in edge AI, computer vision acceleration, and reconfigurable hardware architectures, aligning with early-stage Research Excellence recognition.

Citation Metrics (Scopus)

30

25

20

15

10

5

0

Citations
29

Documents
7

h-index
4

■ Citations
■ Documents
■ h-index


View Scopus Profile

Featured Publications

Yuh-Ming Ferng | Engineering | Best Researcher Award

Published on by Academic Awards

Prof. Yuh-Ming Ferng | Engineering | Best Researcher Award

National Tsing Hua University | Taiwan

Prof. Yuh-Ming Ferng, a distinguished Professor at the Department of Engineering and System Science, Institute of Nuclear Engineering and Science, National Tsing Hua University (NTHU), has made significant contributions to nuclear engineering through his extensive research and academic leadership. He earned his B.S. and Ph.D. in Nuclear Engineering from NTHU, where his doctoral thesis focused on the numerical simulation of the rewetting process. With a professional career spanning over three decades, Prof. Yuh-Ming Ferng has held roles as Assistant, Associate, and Full Professor at NTHU, alongside senior research positions at its Nuclear Science and Technology Development Center and the Center for Energy and Environmental Research, as well as the Institute of Nuclear Energy Research. His research expertise covers nuclear reactor safety, severe accident analysis, CFD turbulence modeling, two-phase flow, thermal management, fuel cell simulation, and renewable energy systems. With 2,470 citations, 168 documents, and an h-index of 30, he is a highly impactful researcher in his field.

Profile: Scopus

Featured Publications

  • Ferng, Y.-M., & co-authors. (2026). Determining minimum site area for deep geological repository of spent fuels using thermal simulations. Annals of Nuclear Energy. Advance online publication.

  • Ferng, Y.-M., & co-authors. (2025). Thermal management design for the Be target of an accelerator-based boron neutron capture therapy system using numerical simulations with boiling heat transfer models. Processes. Advance online publication.

  • Ferng, Y.-M., & co-authors. (2024). Development of thermal-hydraulic coupling model for deep-geological disposal of high-level radioactive wastes. Nuclear Engineering and Design.

  • Ferng, Y.-M., & co-authors. (2024). Numerical model for noise reduction of small vertical-axis wind turbines. Wind Energy Science.

  • Ferng, Y.-M., & co-authors. (2024). Numerical prediction of the aerodynamics and aeroacoustics of a 25 kW horizontal axis wind turbine. Journal of Mechanics.

Xun Zhang | Engineering | Best Researcher Award

Published on by Academic Awards

Mr. Xun Zhang | Engineering | Best Researcher Award

ISEP | France

Mr. Xun Zhang is a distinguished scholar specializing in embedded systems and wireless communication, currently serving as Professor at ISEP and permanent researcher at Saclay-Versailles University. He earned his MSc from Sorbonne University in 2005, PhD in Electrical Engineering from the University of Lorraine in 2009, and completed his Thesis Habilitation in Optical Wireless Communication at Sorbonne University in 2021. His career includes appointments as visiting professor at Tsinghua University, China, and De Vic University, Spain, along with postdoctoral research at Centralesupélec, Rennes. A senior member of IEEE, he has contributed extensively to the academic community as Associate Editor of IEEE Transactions on Broadcasting, Guest Editor for MDPI Sensors, Editor-in-Chief of the International Journal of Internet of Things, and organizer of major IEEE conferences including BMSB and ISCAS. He has supervised numerous postdoctoral researchers and PhD students on cutting-edge topics such as visible light communication, 6G IoT networks, indoor localization, and AI-driven optical systems. Recognized with awards including the Vivatech Innovation Award and supported by a French government PhD scholarship, his research continues to shape the future of IoT, 5G/6G, and optical communication technologies.

Profile: Google Scholar

Featured Publications

Ding, W., Yang, F., Yang, H., Wang, J., Wang, X., Zhang, X., & Song, J. (2015). A hybrid power line and visible light communication system for indoor hospital applications. Computers in Industry, 68, 170–178.

Song, J., Ding, W., Yang, F., Yang, H., Wang, J., Wang, X., & Zhang, X. (2014). Indoor hospital communication systems: An integrated solution based on power line and visible light communication. In 2014 IEEE Faible Tension Faible Consommation (FTFC) (pp. 1–6). IEEE.

Shi, L., Shi, D., Zhang, X., Meunier, B., Zhang, H., Wang, Z., Vladimirescu, A., Li, W., … (2020). 5G Internet of radio light positioning system for indoor broadcasting service. IEEE Transactions on Broadcasting, 66(2), 534–544.

Kaloxylos, A., Gavras, A., Camps Mur, D., Ghoraishi, M., & Hrasnica, H. (2021). AI and ML–Enablers for beyond 5G networks. IEEE Communications Standards Magazine, 5(2), 12–18.

Malik, B., & Zhang, X. (2015). Solar panel receiver system implementation for visible light communication. In 2015 IEEE International Conference on Electronics, Circuits, and Systems (ICECS) (pp. 249–252). IEEE.

Jungsoo Nam | Engineering | Best Researcher Award

Published on by Academic Awards

Dr. Jungsoo Nam | Engineering | Best Researcher Award

Dr. Jungsoo Nam | Korea Institute of Industrial Technology | South Korea

Dr. Jungsoo Nam is a distinguished researcher in mechanical engineering, specializing in advanced manufacturing, precision machining, and nanotechnology applications. He earned his Ph.D. in Mechanical Engineering from Sungkyunkwan University, focusing on micro-drilling processes using nanofluids, after completing his undergraduate studies in Mechanical System and Design Engineering at Seoul National University of Science and Technology. Currently serving as Principal Researcher at the Korea Institute of Industrial Technology (KITECH), he has led pioneering projects in hybrid 3D printing, cryogenic machining, additive manufacturing, and carbon fiber reinforced plastics machining. His international research exposure includes a tenure as a Research Scholar at Purdue University, where he contributed to innovative developments in atomization-based spray coating and sensor fusion systems. Recognized with numerous prestigious honors such as the Young Researcher Award at PRESM, KITECH Best Researcher Award, and multiple best paper awards from leading engineering societies, Dr. NamDr. Jungsoo Nam has established himself as a leader in precision engineering and smart manufacturing technologies.

Publication Profile

Scopus

Google Scholar

Educational Background

Dr. Jungsoo Nam pursued his academic journey in the field of mechanical engineering with a strong focus on advanced manufacturing processes and nanotechnology applications. He earned his Bachelor of Science in Mechanical System and Design Engineering from Seoul National University of Science and Technology in Seoul, Korea, where he laid the foundation for his expertise in precision engineering and system design. Building on this foundation, he advanced to graduate studies at Sungkyunkwan University in Suwon, Korea, where he successfully completed his doctoral degree in Mechanical Engineering. Under the mentorship of Dr. Sang Won Lee, his doctoral dissertation was titled “A Study on Characterization and Monitoring for Micro-Drilling Process Using Nanofluids,” reflecting his early commitment to pioneering research in machining processes and process monitoring. His academic background highlights a blend of strong theoretical knowledge and applied research, establishing a solid platform for his distinguished career in engineering innovation.

Honors and Awards

Dr. Jungsoo Nam has been widely recognized for his outstanding contributions to mechanical engineering and precision manufacturing through numerous prestigious honors and awards. His achievements include the Young Researcher Award at PRESM, multiple Best Paper Awards from the Korean Society for Precision Engineering, and the Korean Society of Mechanical Engineers Best Paper Award. At the Korea Institute of Industrial Technology, he was honored with both the Best Researcher Award and the President Award, reflecting his leadership and excellence in applied research. He has also received the KSPE Young Engineer Award, the Kistler Korea Technology Award, and the NAMRC Outstanding Paper recognition, further establishing his influence in the global research community. Early in his career, he earned the Graduate School Award for his dissertation with highest honors and was recognized for highly cited journal articles, including awards from the International Journal of Precision Engineering and Manufacturing. These accolades collectively highlight his innovation, impact, and sustained excellence in engineering research.

Research and Work Experience

Dr. Jungsoo Nam has built an extensive research and professional career in the field of mechanical engineering with a focus on advanced manufacturing, precision machining, and smart technologies. He has been serving as Principal Researcher at the Korea Institute of Industrial Technology, where he has led projects on hybrid 3D printing, cryogenic machining, high productivity turning centers, and machining systems for carbon fiber reinforced plastics with innovative monitoring technologies. His international research exposure includes his tenure as a Research Scholar at Purdue University, where he contributed to atomization-based spray coating, sensor fusion, and development of advanced manufacturing systems. Prior to this, he worked as a Postdoctoral Research Associate at Sungkyunkwan University, advancing IoT-based machine tool prognostics and smart factory integration with cyber-physical systems. His early career as a Graduate Student Research Assistant involved groundbreaking work on environmentally friendly micromachining, nanofluid applications, and cryogenic machining technologies. Additionally, he served in the Republic of Korea Marine Corps, demonstrating discipline and leadership that continue to complement his research endeavors.

Research Focus

Dr. Jungsoo Nam’s research focus lies primarily in the fields of precision machining, advanced manufacturing processes, and sustainable engineering technologies. His work emphasizes micro-drilling, micro-grinding, and milling of difficult-to-machine materials such as titanium alloys and carbon fiber reinforced plastics, where he has pioneered the application of nanofluid minimum quantity lubrication to enhance machining efficiency and environmental sustainability. He has also contributed significantly to the integration of artificial intelligence, machine learning, and health monitoring systems in additive manufacturing and smart factory environments, enabling predictive diagnostics and real-time process optimization. His studies often address critical challenges in aerospace, automotive, and semiconductor applications, particularly through the development of environmentally friendly machining processes using nanodiamond particles, nano-solid lubricants, and cryogenic cooling. By bridging traditional machining with emerging smart technologies, Dr. Nam has established himself as a leader in sustainable precision engineering, ensuring high-quality manufacturing performance while reducing environmental impact and improving industrial competitiveness.

Publication Top Notes

Experimental characterization of micro-drilling process using nanofluid minimum quantity lubrication
Year: 2011
Citations: 310

An experimental study on micro-grinding process with nanofluid minimum quantity lubrication (MQL)
Year: 2012
Citations: 286

Environmentally-friendly nano-fluid minimum quantity lubrication (MQL) meso-scale grinding process using nano-diamond particles
Year: 2010
Citations: 90

Optimization of environmentally benign micro-drilling process with nanofluid minimum quantity lubrication using response surface methodology and genetic algorithm
Year: 2015
Citations: 81

Machinability of titanium alloy (Ti-6Al-4V) in environmentally-friendly micro-drilling process with nanofluid minimum quantity lubrication using nanodiamond particles
Year: 2018
Citations: 76

Conclusion

Dr. Jungsoo Nam is a highly suitable candidate for the Research for Best Researcher Award. His consistent track record of impactful publications, innovative research contributions, and prestigious honors demonstrates excellence and leadership in his field. With minor improvements in global engagement, his potential for long-term influence remains exceptional.

Hakan Yaykaşlı | Engineering | Best Researcher Award

Published on by Academic Awards

Assist. Prof. Dr. Hakan Yaykaşlı | Engineering | Best Researcher Award

Assist. Prof. Dr. Hakan Yaykaşlı | Kahramanmaraş İstiklal University | Turkey

Assist. Prof. Dr. Hakan Yaykaşlı is an accomplished academic specializing in materials science, mechanical engineering, and physics, with a distinguished background in advanced alloys, nanofillers, and composite materials. He holds dual doctoral degrees, one in Mechanical Engineering from Gaziantep University with a focus on nanofillers in hybrid fiber composites, and another in Materials Science and Engineering from Kahramanmaraş Sütçü Imam University, where he studied the structural and mechanical properties of advanced light alloys. He also earned a master’s degree in Physics, exploring the electrical and optical properties of boron-doped thin films, and several bachelor’s degrees in physics, mechanical engineering, and occupational health and safety, along with associate degrees in machinery and emergency disaster management. His academic career includes roles as Specialist, Lecturer, and currently Assistant Professor at Kahramanmaraş İstiklal University. Dr. Yaykaşlı has supervised numerous theses on advanced alloys, nanostructured coatings, and innovative materials, while contributing significantly to teaching, mentorship, and applied research in his field.

Publication Profile

Scopus

Google Scholar

Academic and Professional Journey

Assist. Prof. Dr. Hakan Yaykaşlı is a distinguished scholar with a strong academic background in physics, mechanical engineering, and materials science, reflected through his extensive education and research contributions. He earned a PhD in Mechanical Engineering from Gaziantep University with a thesis on the influence of nanofillers on the fracture and interlaminar shear properties of basalt carbon hybrid fiber reinforced composites, and another PhD in Materials Science and Engineering from Kahramanmaraş Sütçü Imam University, focusing on the structural, thermal, and mechanical properties of advanced AlMgTiB light alloys. His academic journey began with a master’s degree in Physics, where he investigated the electrical and optical properties of boron-doped thin films. He also completed bachelor’s studies in physics, mechanical engineering, and occupational health and safety, along with associate degrees in machinery and emergency disaster management, reflecting his interdisciplinary expertise. Through his academic endeavors, Dr. Yaykaşlı has cultivated a deep understanding of advanced materials, mechanical systems, and applied research, making significant contributions to engineering and science.

Awards and Recognition

Assist. Prof. Dr. Hakan Yaykaşlı has been recognized for his academic contributions and research achievements through prestigious honors that highlight his dedication to advancing science and engineering. Among his notable recognitions is the Publication Incentive Award granted by TÜBİTAK, a highly regarded acknowledgment in Turkey that supports and encourages impactful scientific publications. This award reflects his commitment to producing high-quality research and contributing to the dissemination of knowledge in the fields of mechanical engineering, materials science, and physics. Such recognition not only underlines the academic value of his published works but also demonstrates his ability to align his research with national and international standards of excellence. The award serves as an important milestone in his career, motivating him to further expand his scientific output and continue guiding new research in advanced materials, nanotechnology, and composite structures while inspiring students and colleagues in his field.

Research Focus

Assist. Prof. Dr. Hakan Yaykaşlı’s research focus lies at the intersection of materials science, nanotechnology, and mechanical engineering, with a strong emphasis on the development and characterization of advanced functional materials. His studies explore the mechanical, structural, thermal, optical, and radiation shielding properties of alloys, composites, glasses, and nanomaterials, particularly high entropy alloys, borate and barium-based glasses, and polymer nanocomposites. He has contributed significantly to the field of nanostructured coatings, thin films, and hybrid fiber composites by investigating the role of nanofillers, dopants, and processing techniques on enhancing mechanical strength, fracture resistance, and multifunctional properties. A key area of his expertise is radiation shielding, where he develops innovative glass and alloy systems designed to provide effective protection while maintaining structural integrity. His interdisciplinary approach integrates experimental methods with advanced characterization techniques, contributing to applications in nuclear energy, electronics, aerospace, additive manufacturing, and sustainable engineering materials.

Publication Top Notes

Mechanical and dynamic properties of basalt fiber-reinforced composites with nanoclay particles
Year: 2020 | Citations: 76

Microstructural, thermal, and radiation shielding properties of Al50B25Mg25 alloy prepared by mechanical alloying
Year: 2022 | Citations: 54

Investigation of structural, morphological, mechanical, thermal and optical properties of PVA-ZnO nanocomposites
Year: 2021 | Citations: 35

Investigation of the properties of In doped NiO films
Year: 2014 | Citations: 34

Investigating the PVA/TiO2/CDs polymer nanocomposites: effect of carbon dots for photocatalytic degradation of Rhodamine B
Year: 2022 | Citations: 30

Conclusion

Assist. Prof. Dr. Hakan Yaykaşlı is a strong candidate for the Research for Best Researcher Award. His academic diversity, dual doctoral achievements, and contributions to materials science and mechanical engineering underline his significant role in advancing research. With increased international visibility and expanded research collaborations, he has the potential not only to compete strongly but also to emerge as a leading figure in his discipline, making him a suitable nominee for this recognition.

Mohamed Dokmak | Engineering | Best Academic Researcher Award

Published on by Academic Awards

Mr. Mohamed Dokmak | Engineering | Best Academic Researcher Award

Mr. Mohamed Dokmak, Housing and building national research center of EGYPT, Egypt

Mohamed Mahmoud Ali Ali Dokmak is an Egyptian structural engineer with over 9 years of experience at the Housing & Building National Research Center (HBRC). He holds a B.Sc. (Honors), M.Sc. in Steel Structures, and a Pre-PhD in Structural Engineering from Shoubra Faculty of Engineering, Benha University. 🏗️ A technical committee member for the Egyptian Steel Code and HBRC Development Committee, his research focuses on CFRP-strengthened steel structures and composite systems. 📚 He has published in top journals such as Construction and Building Materials and Structures. 🇪🇬 Mohamed is known for blending field expertise with advanced design research

Publication Profile

Scopus

🎓 Educational Background

Mr. Mohamed Dokmak holds a distinguished academic record in structural engineering. He earned his B.Sc. degree in Structural Engineering from Shoubra Faculty of Engineering, Benha University in July 2013, graduating third in his class with an Excellent with Honors grade, and an exceptional steel structure graduation project. 🏗️ He continued his studies at the same institution, completing an M.Sc. in Steel Structures in 2019. 📘 In 2020, he successfully completed the Pre-PhD year in Structural Engineering with an ‘A’ grade, demonstrating his strong academic foundation and commitment to research excellence.

🏗️ Research Experience

Mr. Mohamed Dokmak has been actively engaged in structural engineering research at the Housing & Building National Research Center (HBRC) since July 2015, serving as an Assistant Researcher and Technical Engineer in the Structures and Steel Constructions Institute. 🔬 He is a dedicated member of the Technical Secretariat for the development of the Egyptian Code for Steel Buildings since 2019. 📘 Additionally, he served on the HBRC Construction Development Committee from 2019 to 2024. 🏢 His work integrates practical engineering knowledge with national standards development, contributing significantly to Egypt’s construction research sector.

🔬 Research Focus

Mr. Mohamed Dokmak’s research primarily centers on structural engineering, with a focus on steel structures, composite systems, and structural strengthening using advanced materials like CFRP (Carbon Fiber Reinforced Polymer). 🏗️ His studies investigate the behavior and performance of hollow steel sections and the interaction between innovative concrete slabs and CF’S beams. His work integrates experimental analysis, design optimization, and material innovation, contributing to safer and more efficient construction technologies. 📐 His research advances sustainable, high-performance solutions in civil engineering, particularly for buildings and infrastructure systems.

Publication Top Notes

📘 “Behavior of hollow steel sections strengthened with CFRP” – Construction and Building Materials, 2019 – Cited by 150+ 🧪
🔗 DOI:10.1016/j.conbuildmat.2019.01.237

📑 “Major Parameters Governing the Strength of Hollow Steel Sections Strengthened by CFRP” – Egypt Steel 19 Conference, 2019 – Cited by 15+ 📊

🏗️ “Investigating the composite action between innovative concrete slabs and CF’S beams” – Structures, 2025 – New Publication
🔗 DOI:10.1016/j.istruc.2025.109399

Junshu Zhang | Engineering | Best Researcher Award

Published on by Academic Awards

Dr. Junshu Zhang | Engineering | Best Researcher Award

Dr. Junshu Zhang, Huazhong University of Science and Technology, China

Dr. Junshu Zhang specializes in structural health monitoring and flexible electronics. His research focuses on improving sensor systems, including recognizing bolt loosening and developing mechanical models for flexible sensors. He has contributed to strain transfer models that predict sensor properties and eliminate environmental factors. With 7 ongoing research projects, 3 patents, and 4 published journal articles, Dr. Zhang is a key innovator in his field. He holds professional membership with the Chinese Society for Vibration Engineering. 🌐

Publication Profile

Scopus

Academic and Professional Background

Dr. Junshu Zhang is a prominent researcher specializing in structural health monitoring and flexible electronics. His work focuses on advancing sensor technologies, particularly in the recognition of bolt loosening and the development of mechanical models for flexible sensors. By establishing strain transfer models, Dr. Zhang aims to predict sensor properties and eliminate the influence of environmental and material factors. With 7 ongoing research projects, 3 patents, and several published journal articles, he is making significant contributions to the field. He is a member of the Chinese Society for Vibration Engineering. 🌐

 

Research Focus 🧑‍🔬

Dr. Junshu Zhang’s research primarily focuses on structural health monitoring and flexible electronics, with a strong emphasis on developing innovative sensor technologies. His work includes bolt preload impact modulation, improving the strain transfer model for flexible sensors, and enhancing measurement calibration for piezoresistive sensors. He has contributed to the design of graphene nanoplatelets-based strain sensors and non-uniform shear stress models to improve sensor accuracy. These efforts aim to optimize sensor performance in structural monitoring systems and flexible electronics. Dr. Zhang’s contributions are central to the advancement of sensor mechanics and sensor applications. 📊📐

 

Publication Top Notes

  • Cointegration-based impact modulation for bolt preload under the influence of percussion force (2024) 🔧
  • Measurement Calibration of Flexible Piezoresistive Sensors Based on Strain Transfer Model Accounting for Coating Effect (2024) 📏
  • Graphene Nanoplatelets/Polydimethylsiloxane Flexible Strain Sensor with Improved Sandwich Structure (2024) 🛠️ – Cited by 2
  • Improved strain transfer model for flexible sensors based on non-uniform distribution of shear stress in each layer (2024) 📐 – Cited by 2

Benkun Tan | Engineering | Best Researcher Award

Published on by Academic Awards

Benkun Tan | Engineering | Best Researcher Award

Dr Benkun Tan, Hunan University of Arts and Sciences, China

Dr. Benkun Tan is a Ph.D. candidate at Changsha University of Science and Technology, specializing in Civil Engineering. His research focuses on steel-concrete composite structures, with significant contributions including studies on temperature field prediction and fatigue damage analysis. Notable publications include “Temperature Field Prediction of Steel-Concrete Composite Decks” and “Fatigue Crack Propagation in Stud Connectors.” Dr. Tan’s work is published in reputable journals such as Journal of Zhejiang University-SCIENCE A and Sustainability. His innovative approach enhances the understanding of structural integrity and performance. 🌉📚✨

Publication profile

Orcid

Education 

Changsha University of Science and Technology, located in Changsha, China, has been the academic home of a Ph.D. candidate in the School of Civil Engineering since September 1, 2019. This institution is renowned for its comprehensive engineering programs, providing a robust curriculum that integrates theoretical knowledge with practical application. The focus on civil engineering equips students with the skills needed to tackle modern infrastructure challenges. Engaging with experienced faculty and participating in cutting-edge research, the candidate is poised to make significant contributions to the field. 📚🏗️🌍 

Research focus 

Benkun Tan is an emerging researcher in the field of civil engineering, specifically focusing on steel-concrete composite structures. His research encompasses temperature field prediction, multiaxial fatigue damage analysis, and fatigue crack propagation in composite beams and connectors. Tan employs innovative methods, including ensemble algorithms and numerical simulations, to enhance the durability and performance of composite materials in construction. His contributions aim to optimize design and layout for temperature measurement in bridges, thereby improving structural integrity and safety. With a commitment to sustainability, Tan’s work is significant for advancing engineering practices in the built environment. 🔧🏗️📊 

Publication top notes

Temperature field prediction of steel-concrete composite decks using TVFEMD-stacking ensemble algorithm

Multiaxial Fatigue Damage Analysis of Steel–Concrete Composite Beam Based on the Smith–Watson–Topper Parameter

Optimization Method of Temperature Measuring Point Layout for Steel-Concrete Composite Bridge Based on TLS-IPDP

Fatigue Crack Propagation and Life Analysis of Stud Connectors in Steel-Concrete Composite Structures

Numerical Study on Stress Intensity Factors for Stud Connectors of Steel–Concrete Connection

Conclusion 

Dr. Tan’s research portfolio demonstrates consistent contributions to the fields of temperature modeling, fatigue analysis, and lifecycle assessment of steel-concrete composite structures, underscoring his suitability for the Best Researcher Award in civil engineering. His innovative methodologies and practical applications in composite structures align with the award’s focus on impactful and forward-thinking research in the field. 

 

 

Suganya. R | Engineering | Best Researcher Award

Published on by Academic Awards

Dr. R. Suganya| Engineering | Best Researcher Award

Associate Professor,  Dr.  N.G.P Institute of Technology,  India.

Dr. R. Suganya, an Associate Professor at Dr. N.G.P Institute of Technology, has nearly 20 years of experience in engineering education. Her research focuses on mobile networks, IoT, and machine learning, resulting in 21 publications in Scopus-indexed journals. Notable achievements include the Academic Excellence Award from Novel Research Academy and multiple NPTEL accolades. As a mentor for the IITB-AICTE Mapathon, she has demonstrated her commitment to student engagement and collaborative learning. Dr. Suganya’s impressive contributions to academia and research make her a deserving candidate for the Research for Best Researcher Award.

Publication Profile

Google Scholar

Educational Background 

Dr. R. Suganya holds a commendable academic record, beginning with her Bachelor of Engineering (B.E.) in Electronics and Communication from V.L.B Janakiammal College of Engineering and Technology, where she graduated with First Class honors. She continued her education at Kumaraguru College of Technology, earning a Master of Engineering (M.E.) in Computer Science and Engineering with Distinction. Her commitment to academic excellence culminated in a Ph.D. from Anna University, Chennai, where she conducted advanced research, further solidifying her expertise in her field. This solid educational foundation underpins her effective teaching and innovative research contributions in engineering.

Professional Experiences

Dr. R. Suganya has a robust academic background, currently serving as an Associate Professor at Dr. N.G.P Institute of Technology since May 2023, following an extensive tenure of nearly 17 years at Sri Krishna College of Technology. Her teaching experience spans across various levels of engineering education, showcasing her dedication to nurturing the next generation of engineers. Additionally, her role as a lecturer at Nanjiah Lingammal Polytechnic College provided her with foundational teaching experience that further solidified her pedagogical skills.

Research Interests and Contributions

Dr. Suganya’s research interests are primarily in the domains of mobile networks, IoT, and machine learning, evidenced by her impressive publication record. She has authored 21 articles in Scopus-indexed journals, covering innovative topics such as channel allocation methods, secure voting systems, and cancer recognition frameworks. Her recent work involves the application of advanced algorithms and machine learning techniques, demonstrating her commitment to leveraging technology for real-world applications.

Awards and Achievements  

Dr. Suganya’s achievements have not gone unnoticed. She has received several accolades, including the Academic Excellence Award from Novel Research Academy and the NPTEL Discipline Star Award on two occasions. Her recognition as a mentor for the IITB-AICTE Mapathon further underscores her ability to guide students and foster collaborative learning environments. Such acknowledgments illustrate her impact within the academic community and her dedication to excellence in research and teaching.

Conclusion

In conclusion, Dr. R. Suganya’s extensive experience, notable research contributions, and numerous accolades make her an exceptional candidate for the Research for Best Researcher Award. Her commitment to academic excellence, coupled with her innovative research in technology, positions her as a leading figure in her field. Recognizing her contributions through this award would not only honor her achievements but also inspire others in the academic community to pursue excellence in research and education.

Publication Top Notes

  • Automated smart trolley with smart billing using Arduino 📝 (22) – 2016
  • Classification of DDoS attacks–A survey 📊 (13) – 2020
  • Simulation and Analysis of SVHM Technique for DCMLI under Transient Conditions with Non-Linear Loads 🔬 (8) – 2017
  • Blockchain based secure voting system using IoT 🔒 (6) – 2020
  • Reduction of THD in Single Phase AC to DC Boost Converter using PID controller ⚡ (6) – 2014
  • Fuzzy rough set inspired rate adaptation and resource allocation using Hidden Markov Model (FRSIRA-HMM) in mobile ad hoc networks 🧠 (5) – 2019
  • Automated Toll Plaza System Using RFID and GSM Technology 🚦 (5) – 2018
  • Tamper detection using watermarking scheme and k-mean clustering for bio-medical images 🖼️ (5) – 2016
  • Voltage control of AC-DC converter using sliding mode control ⚙️ (5) – 2013
  • Air Quality Monitoring System with Emergency Alerts Using IoT 🌍 (4) – 2021
  • Detect fake identities using improved Machine Learning Algorithm 🔍 (4) – 2021
  • Smart sentimental analysis of the impact of social media on COVID-19 📱 (4) – 2021
  • Pathogenesis of oral squamous cell carcinoma—an update 🦷 (4) – 2019
  • Identifying and Ranking Product Aspects based on Consumer reviews 🛍️ (4) – 2015
  • An Iterative Image Restoration Scheme for Degraded Face Images 🖥️ (4) – 2013
  • Product review analysis by web scraping using NLP 📝 (3) – 2022
  • An Erlang Factor integrated channel allocation method for boosting quality of services in mobile ad hoc networks 📶 (3) – 2018
  • Denial-of-Service Attack Detection Using Anomaly with Misuse Based Method 🚫 (3) – 2016
  • Development and Proposal System for the Formulation of Solar paint 🌞 (2) – 2021
  • Immunohistochemical expression of Bcl‑2 in oral squamous cell carcinoma 🩺 (2) – 2009

 

mehrdad ghamari | Engineering | Best Researcher Award

Published on by Academic Awards

Mr. mehrdad ghamari | Engineering | Best Researcher Award

PhD student,  Edinburgh Napier University, Edinburgh, United Kingdom United Kingdom

Profile :

Scopus

Education Background :

Mehrdad Ghamari has a solid educational foundation, culminating in a Ph.D. and impressive degrees in Structural Engineering and Civil Engineering. His academic journey includes prestigious institutions, such as the University of Isfahan and the University of Tehran, where he maintained high GPAs, showcasing his commitment to excellence. His ongoing role as a Visiting Researcher at prominent universities in the UK and Portugal demonstrates his pursuit of advanced knowledge and skills in his field.

Professional Experience :

Ghamari’s extensive work experience, including his role in designing and supervising numerous concrete and steel structures, showcases his practical application of research findings in real-world settings. His professional memberships and certifications reflect a commitment to lifelong learning and adherence to industry standards, enhancing his credibility as a researcher and engineer.

Research Experience & Interests :

Ghamari’s research portfolio reflects significant contributions to civil engineering, particularly in structural analysis and innovative materials. His work on photovoltaic integration for passive cooling and the effects of lateral constraints on historical masonry demonstrates both depth and breadth in addressing contemporary challenges in engineering. Collaborations with esteemed professors and publications in recognized journals further solidify his status as a leading researcher.

Award And Recognition :

Mehrdad Ghamari’s exceptional contributions to the field of civil engineering have earned him significant recognition. He has been honored for his innovative research on sustainable building technologies, receiving accolades from various academic and professional organizations. His publications in high-impact journals demonstrate his commitment to advancing knowledge and practices in structural engineering. Ghamari’s dedication to education and mentorship has also been acknowledged, with awards recognizing his outstanding teaching efforts at multiple universities. These achievements reflect his passion for engineering and his influence on both the academic community and the broader industry.

Conclusion :

In summary, Mehrdad Ghamari’s exceptional educational background, extensive research experience, impactful academic contributions, and robust professional engagement make him a highly suitable candidate for the Research for Best Researcher Award. His commitment to advancing the field of civil engineering through innovative research and teaching positions him as a leader in his domain, deserving of recognition for his achievements and contributions.

Publication Top Notes :

  • Solar Window Innovations: Enhancing Building Performance through Advanced Technologies
    Ghamari, M., Sundaram, S. (2024). Energies, 17(14), 3369. 📄 (0 citations)
  • Advancing sustainable building through passive cooling with phase change materials, a comprehensive literature review
    Ghamari, M., See, C.H., Hughes, D., Patchigolla, K., Sundaram, S. (2024). Energy and Buildings, 312, 114164. 📄 (5 citations)
  • Flanges’ Impact on Persian Historical Masonry Walls: Modeling Safety Factors
    Ghamari, M., Karimi, M.S., Lourenço, P.B., Sousa, H.S. (2024). International Journal of Engineering, Transactions B: Applications, 37(6), pp. 1136–1145. 📄 (0 citations)
  • Solar Wall Technology and Its Impact on Building Performance
    Ghamari, M., Sundaram, S. (2024). Energies, 17(5), 1075. 📄 (2 citations)
  • Effects of Lateral Constraints and Geometrical Characteristics on Deformation Capacity of the Persian Historic Unreinforced Masonry Shear Walls under Uncertainty Conditions
    Ghamari, M., Karimi, M.S., AmirShahkarami, A. (2021). International Journal of Engineering, 33(11), pp. 2127-2136. 📄 (0 citations)